12V 460Ah V2 Elite Series LiFePO4 Battery (5.89kWh)

This battery is best suited for high-capacity 12V deep-cycle systems, including RV house power, marine house banks, solar storage, off-grid cabins, van and overland builds, backup power, and properly designed inverter systems. It is ideal for users who want a large single-battery lithium solution instead of wiring several smaller batteries together.

The 12V 460Ah Elite battery is commonly used in large inverter-class systems and provides up to 230A continuous discharge. A 3,000W inverter installation must be designed correctly, with proper cable size, fusing, surge capacity, inverter efficiency, and load calculations. For sustained full-load inverter use, confirm the complete system design before installation.

Yes. This model includes Victron communications and is designed to work with compatible Victron GX devices through BMS CAN communication. Proper setup may include the correct communication cable, DIP switch configuration, DVCC settings, and selecting Epoch as the controlling BMS in the Victron system.

Yes. The Epoch 12V 460Ah Elite battery is IP67 rated, meaning it is dustproof and waterproof, including protection against temporary immersion up to 1 meter for 30 minutes. For best long-term reliability, install it in a secure location with protected cabling, proper strain relief, and no unnecessary exposure to standing water or mechanical damage.

Yes. This battery includes internal self-heating for cold-weather charging support. The heating system helps bring the cells into a safe charging temperature range before charge current is accepted. Always use compatible lithium charging equipment and follow Epoch’s temperature and charging guidelines for cold-weather operation.

Yes. This battery supports system expansion when installed according to Epoch’s guidelines. It can be connected with up to 4 batteries in series and up to 16 batteries in parallel. For multi-battery banks, use matched batteries of the same model, age, capacity, and state of charge, along with properly sized cables, fuses, busbars, and charging equipment.

In many applications, yes. The Epoch 12V 460Ah Elite battery uses a Group 8D footprint and can replace compatible lead-acid battery banks when the battery tray, cable clearance, terminal layout, charging profile, inverter requirements, and system design are compatible. Always verify dimensions and electrical requirements before installation.

For compatible non-Victron lithium charging systems, the recommended settings include 14.2V absorption voltage, 15 minutes absorption time per battery, 13.5V float voltage, 13.3V re-bulk voltage, equalization disabled, and temperature compensation disabled. Victron-integrated systems should follow Epoch’s Victron communication and DVCC setup instructions.

This model is designed as a high-capacity deep-cycle lithium battery for energy storage and house-power applications. For engine cranking or starting applications, use a cranking-rated battery or confirm compatibility directly with Epoch and your engine manufacturer before installation.

The battery includes the 12V 460Ah Elite Series LiFePO4 battery, built-in Bluetooth monitoring, internal heating, Victron communication capability, advanced BMS protection, and an external power button with an upgraded battery gauge. Additional installation hardware, chargers, cables, fuses, and Victron components should be selected based on the system design.