12V 460Ah V2 Elite Series LiFePO4 Battery (5.89kWh)
IP67BluetoothHeated
$2,399
In Stock
Loading page content, please wait...Loading page content, please wait...Loading page content, please wait...Loading page content, please wait...
Freedom is the reason people travel by RV, camper van and overland rig. Yet a heavy, aging lead-acid bank can keep that freedom tied to shore power, crowded campgrounds or a noisy generator. Limited usable capacity, slow charging and falling voltage create battery anxiety just when you want to stay one more night beyond the hookups.
Epoch RV lithium batteries provide a lighter, smarter foundation for dependable off-grid power. A properly sized LiFePO4 RV battery can keep refrigeration, lights, fans, water pumps, communications and inverter-powered appliances running with more consistent voltage and more usable energy than a traditional lead-acid system. Pair the battery bank with compatible solar, shore-power and alternator charging, and you can spend more time exploring instead of watching the battery meter.
These batteries support a wide range of mobile applications, including travel trailers, fifth wheels, Class A, B and C motorhomes, Sprinter and Transit conversions, truck campers, skoolies and expedition vehicles. The best lithium battery for a camper is the one that matches the rig's daily watt-hour use, inverter demand, charging sources, available space and expected climate.
A well-planned off-grid lithium battery system solves several of the limitations that make lead-acid and AGM banks frustrating for frequent travelers:
The flatter lithium curve below explains why a 12V lithium RV battery can feel stronger for longer. LiFePO4 stays near its working voltage through most of the discharge, while lead-acid voltage declines more steadily as capacity is used.
LiFePO4 cells should not be charged below freezing unless the battery has an approved heating strategy. Select heated lithium batteries for RV use include internal heating that warms the cells before normal charging begins. This makes them a strong choice for winter camping, ski-area parking, shoulder seasons and cold overland travel. Heating capability and minimum charging temperature vary by model, so review the individual specifications.
LiFePO4 batteries do not normally vent hydrogen gas during charging the way flooded lead-acid batteries can. That makes them well suited to many protected interior compartments, such as an electrical cabinet, dinette base or secured storage area. To install a lithium battery inside a camper, follow the battery manual and applicable RV requirements. Provide secure mounting, service access, correct fusing, protected cable routing, moisture control and thermal management, and do not trap heat from nearby chargers or inverters.
Bluetooth-equipped Epoch models let you check state of charge, voltage, current, temperature, cycle history and system alerts from a compatible phone. The integrated Battery Management System helps protect against overcharge, excessive discharge, overcurrent, short circuits and unsafe temperatures. Selected Elite Series models also offer native CANBus communication with compatible Victron GX equipment, including Cerbo GX and Ekrano GX systems, for centralized monitoring and BMS-managed charging when correctly configured.
A 12V lithium RV battery is the familiar upgrade path for many factory-built travel trailers and motorhomes. High-capacity single-battery options can simplify wiring and maximize energy in a limited compartment. For example, Epoch's 12V 300Ah Essential Series battery stores 3.84kWh in a 58-pound Group 31 format, while 12V 460Ah Elite models provide 5.89kWh for larger boondocking and inverter systems.
A physical drop-in RV lithium upgrade is not always an electrical drop-in. Confirm the converter or inverter/charger profile, solar-controller settings, alternator charging strategy, battery monitor, cable size, fusing, terminal clearance and compartment dimensions before installation.
A 24V camper van battery can be a smart foundation for mid-sized and large custom builds using 2,000W to 3,000W-class inverters. At the same power, a 24V system carries roughly half the current of a 12V system, which can reduce voltage drop and cable-size requirements when the complete installation is engineered correctly. Native 24V storage also avoids building the battery voltage from multiple 12V units in series.
A 48V lithium battery system is aimed at advanced van conversions, luxury fifth wheels, skoolies and large off-grid builds with substantial inverter loads. Higher system voltage reduces DC current for a given wattage, supporting efficient high-power architecture and large inverter platforms.
To run RV AC on lithium battery power, size the entire system around the air conditioner's running watts, startup surge, expected runtime, inverter efficiency, recharge capacity and reserve for other loads. Battery energy alone is not enough; the BMS output rating, inverter, busbars, disconnects, cables, fuses and charging equipment must all support the demand.
Epoch's RV collection includes 12V, 24V and 48V options with model-specific combinations of Bluetooth monitoring, internal heating, weather protection and Victron communications. Many current models carry an 11-year manufacturer warranty, while collection-wide coverage is listed as up to 11 years and varies by model. Compare voltage, watt-hours, continuous output, dimensions, weight, charging limits and communication features to build the best lithium battery system for your boondocking style.
The best lithium RV batteries do more than replace an old lead-acid battery. They should provide dependable off-grid energy, support high-demand appliances, communicate with the rest of your electrical system, protect themselves in changing conditions and be backed by knowledgeable people when you need help.
Epoch Batteries builds LiFePO4 battery solutions for RVs, camper vans, motorhomes, travel trailers, fifth wheels, truck campers, skoolies, overland vehicles and other mobile power systems. The collection includes 12V, 24V and 48V lithium RV batteries, allowing owners and professional builders to choose the right voltage, capacity and output for anything from a simple house-battery replacement to a high-power Victron energy system.
What makes Epoch different is the combination of high-capacity lithium storage, advanced Battery Management System protection, model-specific cold-weather heating, Bluetooth monitoring, rugged construction, native Victron communications, U.S.-based customer support and access to a growing network of authorized dealers.
Not every RV needs the same battery. The best lithium battery for your RV is the one that matches your daily energy use, inverter size, charging sources, installation space, climate and travel style. Epoch gives you the range of options needed to build that system correctly.
A properly designed LiFePO4 RV battery system addresses many of the limitations that make flooded lead-acid and AGM batteries frustrating for frequent travelers.
For boondockers, full-time RVers and van travelers, these advantages can mean longer stays away from hookups, less generator runtime and more confidence in the electrical system.
Selected Epoch Elite Series batteries and other designated Victron-compatible models include native CAN-bus communication for compatible Victron GX devices, including Cerbo GX and Ekrano GX systems.
When connected and configured according to Epoch’s instructions, the battery’s internal BMS can communicate information such as state of charge, battery voltage, temperature, alarms and permitted charge or discharge limits to the Victron system. This gives the GX device direct access to battery data instead of requiring the entire system to estimate battery condition from voltage alone.
With Victron Distributed Voltage and Current Control, or DVCC, compatible Victron components can respond to limits communicated by the battery BMS. The GX device can coordinate supported inverter/chargers, solar charge controllers and other connected equipment using the battery’s requested charging parameters.
This closed-loop communication is an important advantage for advanced RV, camper van and off-grid solar installations. The battery and charging system work from the same real-time information, supporting more coordinated charging, centralized monitoring and better system visibility.
Victron communication features vary by Epoch model. Proper installation may require the correct communication cable, battery addressing or DIP-switch configuration, compatible firmware and the correct GX and DVCC settings.
Every dependable lithium RV battery needs more than quality cells. It also needs a well-designed Battery Management System.
The integrated BMS in Epoch batteries helps protect the battery against conditions such as overcharging, excessive discharge, overcurrent, short circuits and unsafe operating temperatures. Available protections and electrical limits vary by model, so the battery’s continuous output, surge capability and charge-current rating should always be matched to the rest of the RV power system.
The BMS is especially important in mobile applications, where batteries must handle vibration, changing temperatures, solar charging, alternator charging and rapidly changing inverter loads.
Bluetooth-equipped Epoch lithium RV batteries allow owners to view important battery information through a compatible mobile device. Depending on the model and app version, available information may include state of charge, voltage, current, temperature, operating status and system alerts.
This makes it easier to understand how much energy is available, how quickly the battery is charging and how individual appliances affect the system. Bluetooth monitoring can also help identify an unexpected load or charging problem before it leaves you without power.
Because LiFePO4 batteries maintain a relatively flat voltage through much of their discharge, direct BMS-based state-of-charge information can be more useful than attempting to estimate remaining capacity from voltage alone.
LiFePO4 cells should not be charged below their approved minimum temperature without a suitable heating strategy. Select heated Epoch RV batteries include internal heating designed to warm the cells before normal charging begins.
A heated lithium RV battery can be especially valuable for winter camping, ski trips, mountain travel, cold-weather boondocking and RVs stored in unheated exterior compartments. It can allow available solar, shore-power or alternator charging to be used after the battery reaches an acceptable cell temperature.
Heating operation, activation requirements and minimum charging temperatures vary by model. Always review the specifications and installation manual for the battery you select.
RV batteries may be exposed to vibration, dust, road debris, humidity and changing weather. Epoch offers model-specific enclosure protection, including IP54- and IP67-rated options within the current RV battery collection.
An appropriate enclosure rating can provide added confidence in demanding mobile installations, but it does not replace proper system design. Batteries must still be securely mounted with adequate service access, protected cables, correctly sized overcurrent protection and sufficient clearance from heat-producing chargers and inverters.
Always follow the installation manual and applicable electrical and RV requirements, even when installing a battery with a high ingress-protection rating.
High-capacity single-battery options can reduce the number of individual battery cases, interconnect cables and terminals required in a large RV battery bank.
For example, select Epoch 12V 460Ah and 24V 230Ah batteries provide approximately 5.89kWh of stored energy in a single battery. Epoch also offers 48V lithium battery options for advanced systems with large inverter loads.
Using fewer high-capacity batteries can simplify an installation, but capacity is only one part of system design. The battery’s continuous output, peak output, maximum charge current, dimensions, terminal arrangement and communication capabilities must also support the application.
Select Epoch V2-T Elite Series batteries include an integrated, user-serviceable Class T fuse. Class T protection is commonly selected for high-current lithium systems because of its strong interrupting capability.
Integrating this protection into the battery can create a cleaner and more serviceable high-power installation. However, the complete RV electrical system must still include properly engineered overcurrent protection, disconnects, busbars and cable protection based on the installation.
Many current Epoch lithium RV batteries carry an 11-year manufacturer warranty, while coverage across the complete collection is listed as up to 11 years and varies by model.
Long-term warranty support matters in an RV because the battery is part of a larger electrical system that may be relied on every day. Review the warranty terms for the specific battery, retain proof of purchase and complete any required product registration within the stated period.
Choosing a lithium RV battery is also a decision about who will support the product after installation.
Epoch provides U.S.-based customer and technical support for product selection, system compatibility questions, troubleshooting and warranty assistance. That gives RV owners, builders and installers a direct resource when they need help understanding battery settings, communication requirements or application limits.
Epoch also works with an extensive and growing network of authorized dealers, installers, OEM builders and specialty power partners across the United States and North America. The Epoch dealer locator can help customers identify available partners by location.
A qualified local dealer can provide valuable assistance with battery selection, installation planning, charging equipment, inverter compatibility and ongoing service. This dealer network is particularly useful for travelers who prefer local expertise instead of relying entirely on a distant online marketplace.
Local availability varies, but the combination of U.S.-based factory support and authorized dealer assistance gives Epoch customers multiple paths to get help before, during and after an RV lithium battery upgrade.
A dependable boondocking battery system must support both your daily energy use and the appliances that create short periods of high demand.
Typical RV loads include:
A large lithium RV battery can store the energy required by these loads, but the battery must be paired with correctly selected charging and distribution equipment. The inverter, inverter/charger, solar controller, alternator charger, busbars, cables, fuses and disconnects must all support the expected current.
Solar panels can extend off-grid runtime by replacing some of the energy used each day. A DC-to-DC charger can replenish the battery while driving, and a compatible converter or inverter/charger can recharge the system from shore power or a generator.
For RV air conditioning, calculate the air conditioner’s running wattage, startup requirements, desired runtime, inverter efficiency and reserve capacity for other loads. A large battery alone does not guarantee that an air conditioner will operate correctly. The battery’s BMS output and every component between the battery and appliance must support the load.
A 12V lithium RV battery is the most familiar upgrade for travel trailers, fifth wheels, truck campers and factory-built motorhomes. Most traditional RV lighting, pumps, fans and control systems already operate at approximately 12 volts.
A high-capacity 12V Epoch battery can provide substantial off-grid storage while preserving compatibility with common RV equipment. Before upgrading, confirm that the converter or inverter/charger, solar controller and alternator-charging system have suitable lithium settings.
A battery that physically fits in an existing compartment is not automatically an electrical drop-in replacement. Cable size, terminal clearance, fusing, battery monitoring and charging profiles must also be checked.
A 24V camper van battery can be a practical choice for custom builds using medium-to-large inverters. For the same amount of power, a 24V system carries approximately half the current of a 12V system.
Reducing current can help limit voltage drop and may allow more manageable cable sizes when the complete installation is properly engineered. Native 24V storage can also avoid constructing a 24V bank from multiple 12V batteries wired in series.
Many 24V camper systems use a properly sized 24V-to-12V converter to operate traditional 12V lighting, pumps, fans and other DC loads.
A 48V lithium battery system is suited to advanced camper vans, luxury fifth wheels, skoolies, expedition vehicles and other installations with substantial inverter loads.
At the same wattage, a 48V system carries approximately one-quarter of the current of a 12V system. This can support efficient high-power architecture for large inverter/chargers, air-conditioning systems and other demanding equipment.
A 48V RV electrical system requires careful engineering and appropriate conversion for any 12V loads. The battery voltage should be chosen as part of the complete system design rather than simply selecting the highest available voltage.
Start with how you actually use your RV instead of choosing a battery based only on its amp-hour rating.
Amp-hours alone do not determine whether a battery is right for an RV. Watt-hours, BMS output, charging limits and system compatibility are equally important.
Lead-acid and AGM batteries remain familiar and may have a lower initial purchase price, but they have several limitations for frequent off-grid travel.
Lead-acid batteries are commonly operated within a more conservative state-of-charge range to preserve service life. Their voltage also decreases steadily during discharge, and heavy loads can cause voltage sag that triggers an inverter’s low-voltage cutoff.
LiFePO4 RV batteries are designed to provide a greater amount of usable energy, maintain steadier voltage and accept efficient charging when connected to compatible equipment. They can also provide significant weight savings in systems that would otherwise require several large lead-acid batteries.
Lithium batteries do require the rest of the system to be configured correctly. An RV lithium conversion may require changes to the converter, inverter/charger settings, solar-controller profile, battery monitor or alternator-charging strategy.
Treating a lithium battery as part of a complete electrical system produces better results than viewing it as a simple one-for-one battery replacement.
Whether you are upgrading a weekend travel trailer, building a full-time camper van or designing a large Victron-powered motorhome, Epoch offers lithium RV batteries for a wide range of off-grid power requirements.
Compare the batteries above by:
The best lithium RV battery is not simply the largest battery that fits in the compartment. It is the battery that safely supports your loads, works with your charging equipment, fits the available space and gives you enough reserve for the way you travel.
With advanced LiFePO4 technology, smart battery management, high-capacity options, native Victron integration on compatible models, U.S.-based support and an extensive authorized dealer network, Epoch Batteries provides a strong foundation for reliable RV, van and camper power.
