Loading page content, please wait...
DAD5
Talk with a technical expert.
24V 60Ah LiFePO4 battery · Pro Series lithium battery
Premium 24V deep cycle lithium power with 1.54kWh of energy, Bluetooth telemetry, smart BMS protection, IP67 construction, internal heating, and Victron-ready communications.
The Epoch 24V 60Ah Pro Series LiFePO4 Battery is a compact 24V 60Ah LiFePO4 battery built for technical users who need reliable 24V deep cycle lithium power in marine, RV, off-grid, backup, and mobile systems. This Pro Series lithium battery delivers 1,536Wh / 1.54kWh of usable lithium storage, 80A continuous discharge, 200A peak output, Bluetooth app monitoring, a smart BMS 24V battery platform, and rugged IP67 waterproof lithium protection in a Group 27 footprint.
A smart BMS 24V battery platform engineered for protection, consistency, and data-driven control.
The Epoch Pro Series is built around a responsive Battery Management System that helps protect the pack from overcharge, over-discharge, over-current, short circuit, and high or low temperature conditions. For installers and technical buyers, that means the battery is not just a lithium upgrade; it is a monitored, protected power platform designed for demanding 24V applications.
With 25.6V nominal output, 60Ah capacity, 80A continuous discharge, 60A maximum charge current, and 200A peak output for 3 seconds, this 24V deep cycle lithium battery supports efficient power delivery for compatible trolling motor, marine house, RV, mobile, solar, and off-grid systems.
A 24V lithium battery with Bluetooth app monitoring and over-the-air firmware support.
The built-in Bluetooth connection pairs with the Epoch Pro app so users can monitor state of charge, voltage, current, temperature, and battery status from a compatible smartphone. This helps reduce guesswork and makes troubleshooting easier without adding a separate display or shunt for basic visibility.
IP67 waterproof lithium construction for marine, RV, outdoor, and off-grid environments.
The sealed IP67-rated enclosure is dustproof and rated for temporary immersion in water up to 1 meter for 30 minutes. It is built for installations where moisture, dust, vibration, rough roads, rain, and harsh operating conditions are part of normal use.
A compact 24V 60Ah drop-in replacement option for compatible Group 27 power systems.
In compatible 24V systems, one 24V lithium battery can replace a two-battery 12V lead-acid series bank where voltage, current, capacity, tray size, charger profile, and wiring requirements match. The Group 27 footprint and 30 lb battery weight help simplify compact installations while reducing maintenance and cable complexity.
Technical 24V lithium power for marine, RV, trolling motor, off-grid, and backup systems.
High-intent technical specifications with practical installation benefits.
Recommended add-ons for a complete 24V Pro Series installation.
Full technical details, dimensions, communication features, and LiFePO4 charging parameters.
Dustproof, waterproof, and built for demanding outdoor environments.
The IP67-rated enclosure is fully dustproof and rated for immersion in water up to 1 meter for 30 minutes. This makes the battery well suited for marine, mobile, RV, and outdoor environments where splash exposure, rain, and dust are common. Install the battery securely with protected cabling and avoid long-term submersion or pressure washing.
Smartphone visibility for state of charge, voltage, current, and temperature.
Bluetooth monitoring through the Epoch Pro app helps users view important battery data from a compatible mobile device. This visibility is especially useful in hidden battery compartments, marine lockers, RV bays, and off-grid installations where quick status checks matter.
CAN/RS485 support for compatible Victron ecosystem integrations.
This Pro Series battery supports CAN/RS485 communication for compatible Victron integrations, helping make battery information available to properly configured system components. Communication setup depends on the specific GX device, inverter/charger, cable, firmware, and system configuration used.
More usable energy. Less maintenance. Longer service life.
LiFePO4 technology provides stable voltage output, long cycle life, fast charging capability, and maintenance-free operation. Compared with traditional lead-acid batteries, this 24V 60Ah drop-in replacement option delivers efficient energy storage in a lighter package while eliminating watering, acid maintenance, and routine lead-acid service.
Verify your battery tray, charger profile, communication wiring, and total system current before installation.
Always confirm Group 27 tray fitment, cable clearance, terminal compatibility, charger compatibility, BMS communication requirements, and total system current before installation. Use a lithium-compatible 24V charger, inverter charger, converter, solar charge controller, or DC-to-DC charger programmed within Epoch’s recommended charging parameters. For parallel battery banks, use matched batteries of the same model, age, capacity, and state of charge, and follow Epoch’s installation guidelines.
Frequently asked questions
Common technical questions about charging, Bluetooth monitoring, IP67 waterproofing, wiring, and integration.
For optimal performance and longevity, use a dedicated 24V LiFePO4 charger or charge controller. Epoch lists 28.4V–28.8V for bulk/absorption charging, 29.2V as the maximum charge voltage / BMS high-voltage cutoff, float disabled preferred or 26.6V–27.2V, 26.4V re-bulk, temperature compensation disabled, and equalization disabled. Avoid lead-acid chargers with desulfation or equalization modes.
Yes. The 24V 60Ah Pro Series features built-in Bluetooth monitoring through the Epoch Pro app for compatible iOS and Android devices. The app lets you view battery status such as SOC, voltage, current, temperature, and health data without wiring a separate physical shunt for basic battery visibility.
The Epoch Pro Series adds professional-grade features for demanding installations, including a smart BMS, IP67 waterproof construction, internal heating, Bluetooth app monitoring, CAN/RS485 communication support for compatible Victron systems, over-the-air firmware updates, and a 6,000+ cycle-life rating.
Yes. Epoch lists this model for up to 16 batteries in parallel to increase total amp-hour capacity while keeping the system at 24V nominal. Use matched batteries of the same model, age, capacity, and state of charge, and confirm all cabling, fusing, charger settings, and installation limits before designing the bank.
Yes. This battery uses an IP67-rated enclosure, meaning it is dustproof and rated for temporary immersion in water up to 1 meter for 30 minutes. It is well suited for marine, mobile, and outdoor environments, but it should still be mounted securely and should not be pressure-washed or used as a long-term underwater battery.
Yes. The 24V 60Ah Pro Series includes CAN/RS485 communication support and is listed as Victron comms ready. Final integration depends on the compatible Victron GX device, inverter/charger, cable, firmware, and system configuration used in the installation.
Yes, this battery is well suited for compatible 24V trolling motor systems and marine house-power loads where voltage, current draw, runtime needs, cable sizing, tray fitment, and charger settings match the published specifications. Always verify the motor manufacturer’s battery requirements before installation.
No. This model is designed as a 24V deep-cycle lithium battery, not as an engine starting battery. For cranking applications, use a cranking-rated lithium battery or confirm compatibility directly with Epoch and the engine manufacturer before replacing an existing starting battery.
Experience worry-free adventures with our robust IP67 protection. Your battery is completely sealed against dust and can be safely immersed in water up to 1 meter deep for 30 minutes. Whether you're caught in heavy rain or crossing streams, this military-grade protection ensures your power stays reliable.
