Victron Ekrano GX System Monitor & Control Hub | 7" Screen
Only 7 left in stock
$619.65
- US-based support
- Available to ship today
Still have questions?
We're here to help! Give us a call and talk with a US-based technical expert.
1/10
Hover to zoom
Marine · RV · Off-grid system control
Victron Ekrano GX System Monitor & Control Hub | 7" Screen
The all-in-one Victron controller for premium marine, RV, and off-grid power systems.
The Victron Ekrano GX system monitor combines a powerful GX communication centre with an integrated Victron 7-inch display in one sleek panel-mounted unit. Part BPP900480100 connects VE.Bus, VE.Can, VE.Direct, tanks, temperature sensors, generators, managed batteries, solar chargers, and supported marine MFDs while adding VRM remote monitoring through WiFi or Ethernet.
7 in
Touchscreen
1024×600
Display resolution
3×
VE.Direct
2×
VE.Can
8–70V
DC input
5 years
Victron warranty
Built for connected power systems
All-in-one GX hub
Controller and screen
VRM remote access
Monitor from anywhere
WiFi + Ethernet
Flexible networking
Marine integration
MFD and NMEA 2000
Panel-mount ready
Hardware included
Venus OS
Expandable GX platform
The All-In-One Power Command Center
GX processing and a premium touchscreen in one clean panel-mounted device.
The Ekrano GX removes the need to install a separate headless GX controller and route a dedicated display cable to another screen. All primary communication and I/O connections terminate behind the integrated display, creating a clean dashboard for high-end boats, RVs, expedition vehicles, and off-grid homes.
Massive 7-Inch Interactive Touchscreen
The bright 1024 × 600 touchscreen provides an immediate overview of battery state of charge, inverter and AC loads, solar harvest, generator and mains status, tank levels, temperatures, alarms, and supported controls. Dynamic dimming and dark-mode-friendly operation support both daylight helms and low-light cabins.
Total System Integration: VE.Bus, VE.Direct & VE.Can
Connect compatible MultiPlus or Quattro inverter/chargers through VE.Bus, SmartShunts and MPPT solar chargers through VE.Direct, and managed batteries or other CAN devices through either of the two independently configurable VE.Can ports. The Ekrano GX also adds tank, temperature, relay, digital-input, USB, and Ethernet connectivity.
Built for Demanding Marine & RV Environments
A slim aluminium control hub designed for professional panel integration.
IP54 Front & Flush-Mount Ready
For buyers searching for a waterproof Victron display, the precise technical rating matters: the installed front is IP54 when mounted with the included steel bracket, while the rear is IP21 and must remain protected inside a dry console. Front mounting with springs provides IP31 protection.
NMEA 2000 & Marine MFD Integration
Share supported Victron power data with compatible Garmin, Raymarine, Navico/Simrad/Lowrance, and Furuno displays. NMEA 2000 integration normally uses a VE.Can port with the appropriate interface cable and correct network termination; the Ekrano GX does not have a native Micro-C port.
Remote Monitoring Anywhere in the World
Victron Remote Management (VRM) Portal
Connect the Ekrano GX to the internet through built-in WiFi or Ethernet and register the installation in the free VRM portal. Review battery levels, solar production, loads, generator operation, alarms, and history from a phone or browser, with supported remote controls and Remote Console access.
Bluetooth Smart is primarily intended to assist with initial connection and network configuration; it is not a universal Bluetooth bridge for every connected Victron component.
Ideal applications
Marine, RV, energy storage, off-grid, and professional vehicle systems.
- ✓ Marine electrical systems, sailing yachts, motor yachts, fishing vessels, and electric-propulsion support systems.
- ✓ Premium RV, motorhome, fifth-wheel, expedition vehicle, and camper electrical installations.
- ✓ Off-grid homes, cabins, workshops, backup-power systems, and energy-storage installations.
- ✓ Victron MultiPlus, Quattro, SmartSolar, SmartShunt, BMV, Orion XS, generator, and tank-monitoring systems.
- ✓ Managed lithium battery systems using a supported CAN protocol and the correct battery-specific communication cable.
- ✓ Systems requiring generator auto start/stop, programmable relays, tank monitoring, temperature monitoring, and remote alerts.
System features
Advanced monitoring, control, networking, and automation in one panel.
7-inch high-brightness touchscreen
A 1024 × 600 display with up to 1000 cd/m² brightness, dynamic dimming, an ambient-light sensor, and a recessed touch-disable button.
Integrated GX processing
Monitor and control batteries, solar chargers, inverter/chargers, generators, shore power, tanks, temperatures, and supported third-party equipment from one panel.
Three VE.Direct ports
Connect compatible SmartShunts, BMV monitors, MPPT solar chargers, Orion XS units, chargers, and other supported VE.Direct devices.
Two configurable VE.Can ports
Use separate CAN networks for VE.Can equipment, BMS-Can batteries, CAN-bus BMS profiles, or supported RV-C applications.
VE.Bus inverter integration
One VE.Bus network with two parallel RJ45 sockets supports compatible MultiPlus, Quattro, and Victron inverter/charger systems.
Tank, temperature, relay, and digital I/O
Three resistive tank inputs, two temperature inputs, two digital inputs, and two programmable relays expand system automation.
VRM remote monitoring
Connect by WiFi or Ethernet for remote monitoring, alerts, supported controls, Remote Console, and firmware management.
Marine MFD integration
Share supported Victron data with compatible Garmin, Raymarine, Navico/Simrad/Lowrance, and Furuno displays when correctly networked.
Recommended cables and accessories
Complete the installation with the correct communication and sensor hardware.
- ✓ Victron RJ45 UTP cable in the required length for VE.Bus or supported VE.Can equipment.
- ✓ Battery-specific CAN-BMS communication cable or harness for managed lithium battery integration.
- ✓ Victron VE.Can-to-NMEA 2000 interface cable for supported NMEA 2000 networks.
- ✓ Victron VE.Direct cables for SmartShunts, MPPTs, BMV monitors, and supported VE.Direct equipment.
- ✓ Victron temperature sensors and compatible resistive tank senders where required.
Technical specifications
Ports, display, power, I/O, dimensions, mounting, protection ratings, and included hardware.
| Product and display | |
|---|---|
| Manufacturer | Victron Energy |
| Part number / SKU | BPP900480100 |
| Product type | GX communication centre with integrated touchscreen |
| Operating system | Venus OS |
| Display | 7-inch TFT LCD touchscreen |
| Resolution | 1024 × 600 pixels |
| Maximum backlight brightness | 1000 cd/m² |
| Dimming | Dynamic through built-in ambient-light sensor or manual control |
| Touch lock | Recessed rear button can enable or disable touch input |
| Communication and networking | |
| VE.Direct | 3 ports; maximum total supported VE.Direct devices is 25 including USB-connected devices, subject to system complexity |
| VE.Bus | 1 isolated VE.Bus network with 2 parallel RJ45 sockets |
| VE.Can | 2 configurable ports; VE.Can 1 isolated, VE.Can 2 non-isolated |
| Supported CAN profiles | VE.Can, BMS-Can, CAN-bus BMS, RV-C and other supported profiles, depending on configuration |
| Ethernet | Yes |
| WiFi | 2.4GHz 802.11 b/g/n |
| Bluetooth Smart | Yes; primarily for initial connection and network configuration |
| USB | 2 USB-A host ports; 1.5A at 5V shared |
| MicroSD | SDHC cards up to 32GB |
| NMEA 2000 / MFD | Supported through correct VE.Can interface/networking and supported marine MFD integration; no native Micro-C port |
| Inputs and outputs | |
| Resistive tank inputs | 3 |
| Temperature sensor inputs | 2 |
| Digital inputs | 2 |
| Programmable relays | 2 × NO/NC; up to 3A at 30VDC or 1A at 125VAC |
| Buzzer | Yes |
| Power and environment | |
| Supply voltage | 8–70V DC |
| Power draw, display on at full brightness | 6.2W at 12V; 6.6W at 24V; 7.4W at 48V |
| Power draw, display off | 2.6W at 12V; 3.0W at 24V; 3.7W at 48V |
| Operating temperature | -20°C to +50°C / -4°F to 122°F |
| Front protection with steel bracket | IP54 when correctly installed |
| Front protection with spring mount | IP31 |
| Rear protection | IP21; rear connections require a protected dry space |
| Enclosure | Robust aluminium casing |
| Dimensions and mounting | |
| Outer dimensions | 124 × 187 × 29.8 mm / 4.88 × 7.36 × 1.17 in, excluding connectors and mounting accessories |
| Mounting options | Panel-integrated flush mount or blind-hole/front mount |
| Rear mounting hardware | Steel bracket, rods, wingnuts and washers included |
| Front mounting hardware | Mounting springs, screws and washers included |
| Included accessories | |
| Power cable | Included, with 3.15A inline fuse and M8 terminal eyes |
| VE.Can terminators | 2 included |
| Terminal blocks | Power and relay terminal blocks included |
| Mounting hardware | Steel bracket kit and front-mount spring kit included |
| Standards and warranty | |
| Safety | IEC 62368-1 |
| EMC | EN 301489-1 and EN 301489-17 |
| Automotive | ECE R10-6 |
| Warranty | Victron standard 5-year warranty, subject to current warranty terms and dealer support process |
One integrated view of your entire energy system
Monitor locally. Manage remotely. Expand as your installation grows.
The Ekrano GX brings batteries, solar, inverter/chargers, shore power, generators, tanks, environmental sensors, and supported third-party equipment together in the Venus OS ecosystem. Its integrated display and complete connection set make it a premium command centre for installations where system clarity and professional presentation matter.
Frequently asked questions
Victron Ekrano GX FAQs
Common questions about Cerbo GX differences, battery integration, mounting, VRM, NMEA 2000, and protection ratings.
What is the difference between the Ekrano GX and the Cerbo GX?
Both are Victron GX communication centres, but the physical design and available I/O are not identical. The Cerbo GX is a headless controller that is normally installed with a separate GX Touch display. The Ekrano GX combines GX processing and a 7-inch touchscreen in one panel-mounted unit, reducing separate display wiring and giving installers a clean all-in-one dashboard.
Will the Ekrano GX work with my Epoch lithium battery?
It can work with compatible CANbus-enabled managed batteries when the battery protocol is supported and the correct CAN-BMS cable, pinout, baud rate, termination, and GX settings are used. Do not assume that any standard RJ45 cable is correct for every Epoch model; follow the exact battery manual or Epoch integration instructions.
Is the Ekrano GX screen waterproof?
The front is rated IP54 when correctly panel-mounted with the included steel bracket, or IP31 when mounted with the supplied springs. The rear enclosure is IP21 and must remain protected inside a dry console, cabinet, or dashboard. It is therefore weather resistant at the installed front face, not a fully submersible device.
How do I mount the Ekrano GX in an RV or boat?
The Ekrano GX supports flush panel mounting or blind-hole/front mounting. Victron includes a steel rear bracket with rods, wingnuts, and washers, plus mounting springs with screws and washers. Use the official cut-out drawing, maintain rear cable clearance, and use the steel bracket when the IP54 front rating is required.
Can I monitor the system from my phone while I am away?
Yes. Connect the Ekrano GX to the internet through WiFi or Ethernet and register the installation in the Victron Remote Management portal. VRM provides remote system monitoring, alerts, Remote Console access, and supported control functions from a phone, tablet, or browser.
How many communication ports does the Ekrano GX have?
It provides three VE.Direct ports, two configurable VE.Can ports, and one VE.Bus network with two parallel RJ45 sockets. It also includes Ethernet, WiFi, Bluetooth Smart, two USB-A host ports, a microSD card slot, tank inputs, temperature inputs, digital inputs, and two programmable relays.
Does the Ekrano GX connect directly to NMEA 2000?
The Ekrano GX supports marine MFD and NMEA 2000 integration, but it does not have a native Micro-C NMEA 2000 connector. NMEA 2000 data sharing normally uses a VE.Can port with the appropriate Victron VE.Can-to-NMEA 2000 interface cable and correct network termination, or a supported MFD integration over Ethernet.
Can the Ekrano GX replace a Cerbo GX and GX Touch display?
In many installations, yes: the Ekrano GX combines the GX controller and touchscreen into a single panel-mounted device. Before substituting it, compare the exact I/O count, mounting location, environmental rating, cable routing, and device compatibility required by your system.
What power supply does the Ekrano GX require?
The Ekrano GX accepts 8 to 70V DC. Victron includes a fused power cable with M8 ring terminals. Victron recommends powering the GX device directly from the battery or DC bus rather than an inverter AC-output circuit so monitoring remains available if the inverter shuts down.
What is included with the Ekrano GX?
The package includes the Ekrano GX, a power cable with a 3.15A inline fuse and M8 ring terminals, two VE.Can terminators, terminal blocks for power and relays, a steel panel-mount bracket with rods and wingnuts, and front-mount springs with screws and washers.
More from Comms Hub
Victron Energy Cerbo GX MK2 System Controller
$272.8512V 1Ah
Victron SmartShunt 500A/50mV Bluetooth Battery Monitor – Smart Battery Shunt for RV, Solar, Marine & Off-Grid Systems
$100.30
Victron GX Touch 50 Display Panel – 5" Touchscreen Monitor for Cerbo GX | RV, Marine & Solar Systems
$220.150
Victron GX Touch 70 Display Panel – 7" Touchscreen Monitor for Cerbo GX | RV, Marine & Solar Systems
$323.850
Victron SmartShunt 500A/50mV IP65 Bluetooth Battery Monitor – Waterproof Smart Battery Shunt for RV, Marine & Solar Systems
$110.50