Epoch Battery Tray (12300A-H) (12334A-H) (12314-ECO)

This exact-fit mounting tray is designed for two Epoch models: the Epoch Essentials 12V 300Ah battery, SKU 12300A-H, and the Epoch 12V 314Ah Eco Series battery, SKU 12314-ECO. If you have one of these two batteries, this tray is the intended Epoch mounting accessory for that footprint.

No. Battery case dimensions vary widely between manufacturers, even when the advertised amp-hour rating is similar. This tray is built around the Epoch 12300A-H and 12314-ECO case footprint, so using it with other brands may leave the battery loose, misaligned, or impossible to secure correctly.

A high-capacity lithium battery can still weigh around 57 to 58 lb. If it is left loose in an RV bay, camper van cabinet, or boat compartment, sudden braking, rough roads, or heavy wake can make it shift. A secure tray helps prevent casing damage, cable strain, loose terminal connections, and dangerous electrical shorts.

This tray is intended for standard upright, flat-floor or flat-deck mounting. It relies on the tray base and retaining hardware to secure the battery against a horizontal surface. Do not use it as a wall-hanging bracket unless Epoch provides written installation approval for that orientation.

A structural battery tray and tie-down system is consistent with professional RV and marine installation best practices, because batteries must be secured against movement. Specific ABYC, RVIA, or local requirements depend on the complete installation, vessel, vehicle, hardware, and mounting surface, so confirm applicable standards with a qualified installer.

You will need basic hand tools and the correct mounting fasteners for your surface, such as wood screws for a plywood RV floor or through-bolts with backing washers for a metal or fiberglass deck. Mount the tray to a solid surface, set the battery into the tray, and secure the retaining hardware according to Epoch guidance.

The product images show the tray assembly with small hardware and retaining components. Because the public product listing does not publish a formal parts list, verify the exact included hardware with Epoch or inspect the kit before installation. You may still need surface-specific screws, bolts, washers, or backing plates for your RV, van, or boat.

Yes, it is a good fit for protected marine battery compartments where the compatible Epoch battery needs to be secured against wake, vibration, and hull movement. Use corrosion-appropriate fasteners and mount it to a structurally sound deck or shelf, away from standing water where possible.