Victron Ekrano GX Wall Mount | BPP900495100
In Stock
$28.05
- US-based support
- Available to ship today
Still have questions?
We're here to help! Give us a call and talk with a US-based technical expert.
1/5
Hover to zoom
Genuine Victron · Surface-mount enclosure
Victron Ekrano GX Wall Mount | BPP900495100
The official Victron enclosure for installing an Ekrano GX on a solid wall—no panel cut-out required.
The Ekrano GX is designed for flush panel mounting, but not every RV, boat, cabin, or equipment room has a panel with the opening and depth it needs. The genuine BPP900495100 wall mount installs on a solid wall with just four screws, holds the Ekrano GX in a dedicated enclosure, and opens from the top so its ports stay reachable without taking the display off the wall.
BPP900495100
Exact part number
Ekrano GX
Compatible display
4 screws
Solid-wall install
No cut-out
Surface mounting
Fold-forward
Service access
5 years
Victron warranty
Exact Ekrano GX accessory match
Genuine Victron
Official Ekrano GX accessory
Part-number verified
BPP900495100
Simple installation
Four screws to a solid wall
No panel cut-out
Surface-mount alternative
Service-friendly
Opens with two screws
Flexible wiring
Cable entry from multiple sides
Surface-Mount Your Ekrano GX Without Cutting a Panel
The official alternative to flush panel mounting.
The Ekrano GX normally installs flush in a panel or console cut-out, which requires both a precise opening and enough rear depth for the unit and its cabling. The Ekrano GX Wall Mount gives you a second path: a dedicated enclosure that fastens to a solid wall with four screws, with no additional drilling or cut-outs required.
This is a mounting accessory only—the Ekrano GX display is sold separately. Once installed, the enclosure lets you place the display on a utility-room wall, in an RV bay, cabin, protected boat interior, or equipment space where panel mounting would be difficult or impossible.
Four-Screw Solid-Wall Installation
The mount fastens to a solid wall with just four screws. Victron publishes an official drill-pattern template for the enclosure, so hole positions can be marked accurately before installation.
No Panel Cut-Out Required
Surface mounting avoids cutting a precise opening into cabinetry, bulkheads, or finished walls—useful for retrofits and for panels that lack the rear depth the Ekrano GX needs for flush mounting.
Opens Without Coming Off the Wall
Two screws at the top release the enclosure, which folds forward while staying attached to the wall. That gives direct access to the Ekrano GX connections for commissioning, upgrades, and service.
Cable Entry from Multiple Directions
Additional cables can be routed to the Ekrano GX interfaces from the sides, top, bottom, or back, so the installation can follow existing wire runs instead of forcing a single cable path.
Built for System Expansion
Adding VE.Direct devices, VE.Can equipment, sensors, or a managed-battery CAN cable later doesn't mean removing the display. Fold the enclosure open, connect the new cable to the correct Ekrano GX port, and close it again.
Genuine Victron Ekrano GX Accessory
Designed by Victron specifically for the Ekrano GX, so the display is housed as intended instead of in an adapted generic box or bracket.
Ekrano GX Compatibility Without Guesswork
Confirm the display model and installation surface before ordering.
The BPP900495100 is Victron's wall-mount accessory for the Ekrano GX (BPP900480100). It is made for the Ekrano GX only; GX Touch 50 and GX Touch 70 displays and the Cerbo GX use different mounting hardware.
The mount is intended for installation on a solid wall. The Ekrano GX's IP54 front rating is specified for flush panel mounting with its included steel bracket, so plan a wall-mount installation for a dry, protected interior location.
Compatible applications
Ekrano GX installations where flush mounting isn't practical.
- ✓ Surface-mounting an Ekrano GX in RV utility bays, camper vans, and mobile workspaces.
- ✓ Protected boat interiors and electrical compartments where cutting a panel opening isn't practical.
- ✓ Off-grid cabins, garages, workshops, and backup-power equipment rooms.
- ✓ Retrofits where an existing panel lacks the opening or rear depth the Ekrano GX needs.
- ✓ Systems that will grow over time and need easy, repeated access to the Ekrano GX ports.
Technical specifications
Exact fitment, mounting, and access details.
Installation guidance
Mount securely, route cables cleanly, and keep the electronics dry.
- ✓ Mount only to a solid wall, using fasteners suited to the wall material.
- ✓ Use Victron's drill-pattern template to mark hole positions before drilling.
- ✓ Disconnect power from the Ekrano GX before opening the enclosure or changing connections.
- ✓ Route and support cables so connectors are not strained when the enclosure is folded open or closed.
- ✓ Choose a dry, protected interior location away from spray, condensation, and heat sources.
- ✓ Follow the Ekrano GX manual for power supply, fusing, and port connections.
Complete your Ekrano GX installation
Pair this wall mount with a Victron Ekrano GX.
The BPP900495100 provides the mounting enclosure only; it does not include the Ekrano GX, communication cables, or power wiring. Confirm the display, the VE.Direct, VE.Can, VE.Bus, or managed-battery cables your system needs, and a properly fused power supply before installation. Shop the Victron Ekrano GX
Frequently asked questions
Victron Ekrano GX Wall Mount FAQs
Common questions about fitment, installation, access, and location.
Does this include the Ekrano GX display?
No. The BPP900495100 is the wall-mount enclosure only. The Victron Ekrano GX (BPP900480100) is sold separately, along with any communication cables and power wiring your system requires.
Why use the wall mount instead of flush mounting?
Flush mounting requires a precise panel cut-out and enough depth behind the panel for the Ekrano GX and its cables. The wall mount lets you install the display on a solid wall surface instead, with no cut-out, when panel mounting isn't practical.
How is the wall mount installed?
It fastens to a solid wall with four screws, with no additional drilling or cut-outs required. Victron publishes a drill-pattern template for marking the hole positions.
Do I have to take it off the wall to add cables later?
No. The enclosure opens from the top with two screws and folds forward while staying mounted, giving access to the Ekrano GX connections for new cables or service.
Where can cables enter the enclosure?
Victron designed the mount so additional cables can be routed to the Ekrano GX interfaces from the sides, top, bottom, or back, letting the installation follow existing wire runs.
Will it fit a Cerbo GX, GX Touch 50, or GX Touch 70?
No. This accessory is made for the Ekrano GX. The GX Touch displays and the Cerbo GX use different mounting hardware, so choose the accessory that matches your exact device.
Is a wall-mounted Ekrano GX waterproof?
No. The Ekrano GX's IP54 front rating is specified for flush panel mounting with its included steel bracket, and the rear of the unit must stay dry. Install the wall mount in a dry, protected interior location away from spray, condensation, and standing water.
Does the wall mount change how the Ekrano GX works?
No. The mount changes how the display is installed, not how it operates. The touchscreen, VRM remote monitoring, and the Ekrano GX's communication ports work the same as in a panel installation.
Is this a genuine Victron part?
Yes. BPP900495100 is Victron Energy's own Ekrano GX Wall Mount, covered by Victron's standard five-year warranty, subject to policy and dealer support terms.
More from Victron Accessory
Victron RJ45 UTP Cable 0.3m - ASS030064901
$7.65
Victron RJ45 UTP Cable 0.9m - ASS030064921
$7.65
Victron RJ45 UTP Cable 1.8m - ASS030064951
$11.05
Victron RJ45 UTP Cable 3m - ASS030064981
$12.75
Victron RJ45 UTP Cable 5m - ASS030065001
$16.15
Victron RJ45 UTP Cable 10m - ASS030065011
$20.4
Victron RJ45 UTP Cable 15m - ASS030065021
$25.5
Victron RJ45 UTP - 20M Cable [ASS030065031]
$38.25
Victron RJ12 UTP Cable 1.8m - ASS030066018
$7.65
Victron Energy, ASS030066050, RJ12 UTP Cable 5 m
$16.15
Victron MK3-USB Interface (VE.Bus to USB) - ASS030140000
$75.65
Victron Interface MK3-USB-C (VE.Bus to USB-C) ASS030140030
$65.45
Victron VE.Direct Cable 0.9m - ASS030530209
$17.85
Victron VE.Direct Cable 3m - ASS030530230
$19.55
Victron VE.Direct Cable 5m - ASS030530250
$22.1
Victron VE.Direct Cable 10m - ASS030530310
$26.35
Victron VE.Direct Cable 0.9m Right Angle - ASS030531209
$17.85
Victron VE.Direct Right Angle Cable 1.8m - ASS030531218
$17.85
Victron VE.Direct Cable 3m Right Angle - ASS030531230
$19.55
Victron VE.Direct Right Angle Cable 5m - ASS030531250
$22.1
Victron VE.Direct Cable 10m Right Angle - ASS030531320
$26.35
Victron ADA010100400 Mains Cord | NEMA 5-15P 2m (6.5ft)
$10.2
Victron VE.Direct Cable 1.8m - ASS030530218
$17.85