FIND A DEALER
This product is available through our authorized dealers and online partners.
Elite Series
12V 460Ah V2-T Elite Series LiFePO4 Battery (5.89kWh)
€2,296.95
IP67BluetoothHeatedVictron Comms
Choose your configuration:
- TECHNICAL BULLETIN DOWNLOAD
- Integrated 400A EATON Class T Fuse enhances safety, reduces wiring complexity, and ensures compliance with ABYC standards.
- VICTRON Communications with distributed charge control via DVCC (Plug and Play, Set it and forget it)
- 11-year warranty
- US-based support
- Available to ship today
Features at a glance
- IP67Waterproof
Dustproof and submersible to 1 m for 30 minutes.
- 4,000+Cycle life
Over 10 years at one full cycle a day.
- iOS + AndroidBluetooth app
Charge, voltage and temperature on your phone in the Epoch Cloud app.
- Advanced BMSProtection
Guards against overcharge, over-discharge, overcurrent and short circuit.
- Self-heatingCold weather
Warms its own cells so it can charge below freezing.
- LiFePO4Safest chemistry
Stable under extreme conditions. 11-year warranty.
- 12V 460Ah V2-T Elite Series LiFePO4 (5.89kWh): Massive 5.89kWh usable energy capacity engineered to replace multiple smaller batteries in premium marine house banks, luxury RVs, and off-grid solar systems.
- User-Serviceable 400A Class-T Fuse: The exclusive "V2-T" design features an integrated, easily accessible 400A EATON Class-T fuse to provide unmatched hardware safety and compliance for high-draw inverter setups—saving you the cost and hassle of external fuse blocks.
- Seamless Victron Integration: Features native CAN communications with distributed charge control (DVCC) for plug-and-play integration and closed-loop management with Victron GX devices.
- High-Output Discharge & Fast Charging: Delivers a heavy-duty 230A continuous discharge (500A peak for 30s) to easily run 3,000W+ inverters, while supporting a rapid 210A continuous charge rate.
- IP67 Waterproof & Sub-Zero Heated: Encased in a fully sealed, submersible housing (up to 1 meter deep) with internal self-heating technology that ensures safe, reliable charging in extreme freezing temperatures (below 0°C).
- Smart Bluetooth & External Display Included: Monitor real-time capacity and cell health via the free Epoch app, or utilize the included external power button and remote digital battery gauge for easy physical access.
- Massive Parallel Expansion: Highly scalable architecture allows you to safely wire up to 16 batteries in parallel to build an ultra-high-capacity energy storage bank (up to 94.2kWh).
- Advanced Smart BMS & UL-Certified Safety: Comprehensive internal protection against over-charge, over-current, short circuits, and temperature extremes, built with rigorously certified components (UL1973 Pack, UL1642, U9540A, and IEC 62619:2022 Cells, UL60691 Fuse).
- 4,000+ Cycle Life & 11-Year Warranty: Exceptional drop-in longevity requiring zero maintenance, backed by an industry-leading manufacturer warranty for total peace of mind.
Configuration
Cell Configuration: 4S2P
Chemistry: LiFePO4
Current
Ah Capacity: 460Ah
Max Continuous Discharge Amps: 230A @ 25°C
Max Charge Current Amps: 210A @ 25°C
Max Discharge Peak Current Amps: 500A (30 Seconds) , 1300A (1 Second)
Series | Parallel: Max (4) in Series OR Max (16) in Parallel - 4S1P or 1S16P
Voltage
Voltage: 12.8V
Max Charge Voltage: 14.6V
Operating Voltage Range: 10.0 - 14.6V
Temperature
Charge Temp Range: -30°C (-22°F) / 55°C (131°F) (with self-heating)
Discharge Temp Range: -20°C (-4°F) / 55°C (131°F)
Storage Temp: 0°C (32°F) / 35°C (95°F)
Weight: 97 (LBS)
Dimensions
Length: 20.75 (inches)
Width: 8.5 (inches)
Height: 12 (inches)
Certifications:
UL1973, RoHS, CE
Batteries employed in non-Victron systems should utilize the following settings:
- Absorption voltage: 14.2V
- Absorption time of 15 minutes per battery
- Float voltage: 13.5V
- Equalization: Off
- No temperature compensation (Disabled)
To use the V2-T Elite with Victron systems.
Set up the battery comm harness and gauge as follows:
- Plug with waterproof bung plugged into master blue port.
- RJ45 cable out of master black port and into slave1 blue port.
- RJ45 cable out of slave1 black port and into slave blue port and so on to daisy chain up to 16 batteries in parallel.
- Set dip switches as per manual.
- Plug in grey RJ45 plug into the Cerbo or Ekrano GX BMS CAN port or if you have the new Cerbo Mk2 plug grey plug inot VE-CAN1 or VE-CAN 2 and change the VE can port speed to 500 KBPS LV.
- To confirm proper reporting, go to the GX/touch screen and confirm the Epoch battery shows up on the device list. Click on the battery line, go to Details. Check to see the number of modules online is equal to the number of batteries installed. Check that the number of AH is equal to the number of AH installed.
- In the GX device/touch screen turn on DVCC, set controlling BMS to Epoch, set battery monitor to Epoch.
- The system should say External Control on the GX touch screen Inverter tile when charging (but not while inverting). The system will automatically cycle to 14.2V with an absorption time of a minimum of roughly 15 minutes per battery followed by 13.5V float voltage.
- It is recommended to manually program the Multiplus, Quattro and all other charge source to these same parameters in case of CAN communication loss.
Epoch Cloud App
Still have questions?
We're here to help! Give us a call and talk with a US-based technical expert.
1/7
Hover to zoom
Downloadable resources
Applications & use cases
- RV house power
- Camper vans and van life
- Travel trailers and fifth wheels
- Motorhomes and Class A or Class C coaches
- Overlanding and expedition vehicles
- Marine house power
- Trolling motors
- Marine electronics and fish finders
- Yachts and large cruising boats
- Electric outboards and marine propulsion support
- Off-grid solar systems
- Solar battery banks and inverter systems
- Home energy storage and backup power
- Cabins and remote power systems
- Ham radio and communications backup
- Commercial fleet and specialty power systems
Epoch V2-T Elite Series · Victron CANbus · Class T fuse
Epoch 12V 460Ah V2-T Elite Series LiFePO4 Battery (5.89kWh)
A flagship 12V 460Ah LiFePO4 battery with 5.89kWh of usable storage, integrated Class T protection, Victron CANbus, Bluetooth monitoring, internal heating, and IP67 waterproof construction.
The Epoch V2-T Elite Series is a high-capacity 12V 460Ah lithium battery built for professional marine, RV, solar, and off-grid systems. This 5.89kWh 12V battery replaces entire banks of heavy lead-acid batteries in a single Group 8D footprint while adding a user-serviceable 400A Eaton Class T fuse, CANbus communication, Cerbo GX integration support, Bluetooth app monitoring, and smart cold-weather heating.
460Ah
Capacity
5.89kWh
Stored energy
230A
Continuous output
400A
Class T fuse
IP67
Waterproof
16x
Parallel ready
Built for professional 12V systems
Integrated Class T fuse
400A Eaton fuse
Victron ready
CANbus / DVCC support
IP67 protection
Dust-tight and waterproof
Bluetooth monitoring
Epoch app visibility
UL1973 certified pack
Certified battery system
11-year warranty
Manufacturer coverage
The Ultimate High-Capacity 12V Lithium Powerhouse
Massive energy density for high-end RVs, marine vessels, and off-grid builds.
With 460Ah of capacity and 5.888kWh / 5.89kWh of usable energy, this high capacity 12V power bank is built to replace multiple lead-acid batteries with one smarter lithium platform. It is ideal for large inverter systems, solar charging, marine house banks, expedition vehicles, and off-grid power systems where space, weight, safety, and monitoring all matter.
The V2-T design targets educated DIY installers and professionals who want more than a simple battery: integrated Class T fuse protection, CANbus communication, Cerbo GX integration, waterproof IP67 construction, internal heating, and complete Bluetooth visibility.
Engineered for Professionals: V2-T Elite Features
Designed around safety, communication, serviceability, and install efficiency.
Unmatched Safety with an Integrated 400A Class T Fuse
High-capacity 12V systems running large inverters require serious short-circuit protection. This 12V battery with Class T fuse protection includes a user-serviceable 400A Eaton Class T fuse inside the battery, reducing wiring complexity and saving valuable installation space compared with many external fuse-block setups.
Seamless Victron & CANbus Communication
This Victron compatible lithium battery uses CANbus communication to share real-time battery data with compatible GX devices. In a properly configured Victron system, DVCC can coordinate charge limits, voltage, temperature, and state of charge from the battery BMS.
IP67 Waterproofing & Extreme Environment Ready
The IP67 waterproof lithium enclosure is dust-tight and immersion-rated to 1 meter for 30 minutes when seals and glands are properly installed, making it a strong fit for wet boat compartments and exposed RV battery boxes.
Smart Internal Heating for Cold-Weather Charging
The cold-weather heated battery design uses internal heating behavior to warm the cells before accepting charge in low-temperature conditions, helping protect the lithium cells during cold RV, marine, and off-grid use.
Real-Time Bluetooth Monitoring App
Use the free Epoch app to view state of charge, cell voltage, temperature, charge/discharge cycles, current flow, and system health alerts without installing a separate battery monitor just for basic visibility.
Compatible applications
Marine, RV, solar, off-grid, and professional 12V power systems.
- ✓ High-end RV house battery systems using large 12V inverters and solar charging.
- ✓ Marine vessels, workboats, and yachts needing a marine grade 12V battery with IP67 protection.
- ✓ Victron-based power systems using Cerbo GX, Ekrano GX, or other compatible GX devices.
- ✓ Off-grid cabins, mobile workshops, expedition vehicles, and remote power installations.
- ✓ Large 12V inverter systems up to 3,000W+ continuous when wiring and protection are properly engineered.
- ✓ Professional installer builds that benefit from integrated Class T fuse protection and CANbus communication.
- ✓ Parallel high capacity 12V power bank systems using up to 16 matched V2-T batteries.
- ✓ Solar energy storage and fast recharge applications requiring 210A continuous charge capability.
Battery features
Premium lithium performance with built-in protection, monitoring, and integration.
12V 460Ah lithium battery
Delivers 5.888kWh / 5.89kWh of usable LiFePO4 storage in a single Group 8D footprint.
Integrated 400A Class T fuse
User-serviceable Eaton Class T fuse helps simplify high-current installation protection and reduce external fuse-block complexity.
Victron CANbus communication
Built to share battery data with compatible GX devices and support distributed charge control through DVCC.
230A continuous discharge
Supports large house-power loads, marine accessories, and 2,500W–3,000W inverter-class systems when properly sized.
500A / 30-second peak output
Handles short surge events such as large inverter startup loads, with additional 1,300A peak output for 1 second.
210A continuous charge capability
Supports rapid recharging from compatible lithium chargers, alternator charging systems, and solar/inverter-charger systems.
IP67 waterproof lithium enclosure
Dust-tight and immersion-rated to 1 meter for 30 minutes when seals and glands are properly installed.
Cold-weather heated battery
Internal heating supports safe charging behavior in freezing conditions and cold-weather RV or marine use.
Bluetooth monitoring app
Monitor state of charge, cell voltage, temperature, cycles, current, and system alerts through the Epoch app.
External power button and gauge
Included local controls make system operation and status checks easier during installation and use.
Advanced smart BMS
Helps protect against overcharge, over-discharge, over-current, short circuit, and high/low temperature conditions.
Parallel scalability
Supports up to 16 batteries in parallel for large 12V power banks; series-parallel configuration is not supported.
Technical Specifications & Expandability
Clean technical details for installers, system designers, and experienced DIY builders.
| General | |
|---|---|
| Brand | Epoch Batteries |
| Model / SKU | C12460A-A |
| Series | V2-T Elite Series |
| Battery type | 12V heated Bluetooth LiFePO4 deep-cycle battery |
| Application focus | Marine, RV, solar, off-grid, industrial, and professional 12V power systems |
| Chemistry | LiFePO4 / lithium iron phosphate |
| Cell configuration | 4S2P |
| Bluetooth | Bluetooth 4.0, compatible with the Epoch app |
| CAN communication | CANbus 500kbit/s with Victron communication support |
| Victron integration | DVCC / distributed charge control through compatible GX devices |
| External controls | External power button and battery gauge included |
| Cycle life | 4,000+ cycles published product rating |
| Capacity and voltage | |
| Nominal voltage | 12.8V |
| Nominal capacity | 460Ah |
| Energy capacity | 5.888kWh / 5.89kWh |
| Maximum voltage | 14.52V |
| Minimum voltage | 10.4V |
| Operational state of charge | 0–100% |
| Internal resistance | ≤8mΩ |
| Self-discharge rate | ≤3% per month |
| Current ratings and fuse protection | |
| Published continuous discharge | 230A @ 25°C |
| Published continuous charge | 210A @ 25°C |
| Peak discharge output | 500A for 30 seconds; 1,300A for 1 second |
| Integrated fuse | User-serviceable 400A Eaton Class T fuse |
| Internal fuse certification | UL60691 certified internal fuse |
| Expansion and communication | |
| Parallel connections | Up to 16 batteries in parallel |
| Series connections | Not promoted for this SEO page; verify with current manual/Epoch before any series installation |
| Series-parallel configuration | Not supported |
| GX communication | Compatible GX device support through BMS CAN connection and DVCC setup |
| Recommended bank practice | Use matched batteries of the same model, age, capacity, and state of charge |
| Temperature and heating | |
| Charge temperature range | 0°C to 50°C / 32°F to 122°F, with internal heating support |
| Discharge temperature range | -20°C to 50°C / -4°F to 122°F |
| Storage temperature range, ≤1 month | -20°C to 45°C / -4°F to 113°F |
| Storage temperature range, ≤1 year | 0°C to 35°C / 32°F to 95°F |
| Charge low-temperature protection | 0°C, with heating behavior |
| Heater activation | 5°C |
| Heater deactivation | 10°C |
| Dimensions and mechanical | |
| Length | 20.86 in / 529.8 mm |
| Width | 8.65 in / 219.8 mm |
| Height | 12.06 in / 306.3 mm |
| Overall dimensions | 20.86 in L × 8.65 in W × 12.06 in H |
| Weight | 97.55 lb / 44.25 kg |
| Case material | PC + ABS, UL94 V-0 |
| Terminals | M8 bolts |
| Terminal torque | 12 N·m / 8.85 lb-ft |
| Ingress protection | IP67, dust-tight and immersion-rated to ≤1m for ≤30 minutes with seals/glands installed |
| Recommended charging settings | |
| Absorption voltage | 14.2V |
| Absorption time | 15 minutes per battery |
| Float voltage | 13.5V |
| Equalization | Off / disabled |
| Temperature compensation | Disabled |
| Charge profile | CC/CV, no equalization |
| Victron systems | Use the communication harness, confirm battery visibility on the GX device, enable DVCC, and set Epoch as controlling BMS |
| Compliance and warranty | |
| Cell certifications | UL1642, UL9540A, IEC 62619:2022 certified cells |
| Pack certification | UL1973 certified battery pack |
| Other compliance | CE and RoHS |
| Warranty | 11-year manufacturer warranty |
What can it run?
Real-world examples for a single 5.89kWh battery. Runtime varies by load and system efficiency.
3,000W+ inverter loads
Supports large inverter applications when the complete installation is properly designed.
100 lb thrust trolling motor
Product-page example lists all-day runtime depending on conditions and usage.
13.5K BTU RV air conditioner
Estimated 4–6 hour runtime under the product-page example conditions.
Off-grid cabin core loads
Estimated 24+ hour runtime for typical core loads, depending on consumption.
Victron and non-Victron charging setup
Program charge sources correctly and let the BMS communicate when available.
For non-Victron systems, Epoch lists 14.2V absorption, 15 minutes of absorption time per battery, 13.5V float, equalization off, and temperature compensation disabled. For Victron systems, connect the battery communication harness, confirm the battery appears on the GX device, turn on DVCC, and set the controlling BMS and battery monitor to Epoch.
Frequently asked questions
Epoch 12V 460Ah V2-T Elite Series FAQs
Common questions about Class T fuse protection, Victron communication, inverters, waterproofing, parallel expansion, and cold-weather charging.
What does the “T” in the V2-T Elite Series mean?
The “T” refers to the integrated Class T fuse. This 12V battery with Class T fuse protection includes a user-serviceable 400A Eaton Class T fuse inside the battery case, helping simplify high-current system protection and reducing the need for a large external Class T fuse block in many installations. Always verify final protection requirements with your installer, ABYC guidance, and local standards.
Is this battery fully compatible with Victron Energy systems?
Yes. The Epoch V2-T Elite Series is built for Victron compatible lithium battery installations. Using the built-in CANbus communication ports, it can connect to compatible GX devices such as a Victron Cerbo GX or Ekrano GX, allowing the BMS to share charge limits, voltage, temperature, state of charge, and battery status through DVCC-enabled system communication.
Can I use this battery in a wet marine environment?
Yes. The V2-T Elite battery has an IP67 waterproof lithium enclosure. IP67 means it is dust-tight and rated for temporary immersion up to 1 meter for up to 30 minutes when seals and glands are properly installed, making it a strong choice for wet marine compartments, exposed RV battery boxes, and demanding mobile installations.
What size inverter can a single 12V 460Ah V2-T run?
A single 12V 460Ah LiFePO4 battery stores 5,888Wh / 5.89kWh of usable energy and provides 230A continuous discharge with 500A peak output for 30 seconds. In a properly engineered 12V system, it is commonly paired with 2,500W to 3,000W inverter-class loads, including RV air conditioners, microwaves, induction cooktops, and other heavy house-power appliances.
Can I connect multiple V2-T 460Ah batteries together?
Yes. The V2-T Elite platform supports up to 16 batteries in parallel, allowing a system to scale from one 5.89kWh battery up to roughly 94.2kWh of 12V storage. This SEO page treats the battery as a 12V parallel power bank platform; series-parallel configuration is not supported, and any series installation should be verified against the latest Epoch manual and technical support guidance.
Will the battery charge if I am camping in freezing weather?
Yes. This cold-weather heated battery uses internal heating behavior to help protect the cells before charging in low temperatures. When the BMS senses conditions that are too cold for safe charging, incoming charge power can be directed to the heating system until the cells reach a safe charging range, then normal charging resumes.
Does the battery need a separate Bluetooth shunt or monitor?
No separate shunt is required for basic battery visibility. The built-in Bluetooth monitoring app can display state of charge, cell voltage, temperature, charge and discharge cycles, and system health alerts from a compatible mobile device.
Is this an ABYC compliant battery?
The battery includes a user-serviceable 400A Eaton Class T fuse, and Epoch states that the integrated fuse enhances safety, reduces wiring complexity, and helps ensure compliance with ABYC standards. Final vessel compliance depends on the complete installation, including cable sizing, routing, overcurrent protection, disconnects, and installer practices.
More from Elite Series
48V 100Ah V2 Elite Series LiFePO4 Battery (5.12kWh)
€2,120.9548V 100Ah
12V 460Ah V2 Elite Series LiFePO4 Battery (5.89kWh)
€1,943.9512V 460Ah
24V 230Ah V2 Elite Series LiFePO4 Battery (5.89kWh)
€1,943.9524V 230Ah
48V 100Ah V2-T Elite Series LiFePO4 Battery (5.12kWh)
€2,296.9548V 100Ah
Epoch 24V 230Ah V2-T Elite LiFePO4 Battery (5.89kWh)
€2,296.9524V 230Ah
Additional Resources
Safety certifications & listings
Every mark below is a standard this battery has been tested against or a listing it carries. Here is what each one covers, in plain English.
IP67
Ingress protection
Dust-tight, and protected against temporary immersion in up to 1 m of water for 30 minutes. Under IEC 60529 the first digit rates solids and the second rates water.
- Sealed against dust and dirt
- Rain, spray and wash-down
- Survives being submerged
IEC 60529, Degrees of protection provided by enclosures
UL 1973
Stationary storage safety
The UL standard for batteries in stationary energy storage and auxiliary power. It covers the pack, its BMS and how the system behaves under fault conditions.
- Electrical and thermal abuse
- Mechanical and environmental tests
- Fault handling and BMS protection
UL 1973, Batteries for use in stationary and motive auxiliary power applications
RoHS
Hazardous substances
Complies with the EU Restriction of Hazardous Substances directive, which limits lead, mercury, cadmium and other toxic materials in electronics.
- Lead, mercury and cadmium below limits
- Restricted flame retardants and phthalates
- Safer to handle and recycle
Directive 2011/65/EU, Restriction of hazardous substances
CE
EU conformity
The manufacturer's declaration that the product meets the European Union's health, safety and environmental requirements, which is required to sell it in the European Economic Area.
- Applicable EU safety directives
- Electromagnetic compatibility
- Environmental requirements
CE marking, EU declaration of conformity